正常配置单点登录后还是每次提示身份验证 10

新手562752 1423

{{ttag.title}}
请大神帮我看下是什么问题,我们北京有两台域控,BJ01 BJ02 在ldap协议都添加了服务器,认证策略 认证方式 密码认证里面也都加了,组策略可以看到正常应用,但还是提示错误,下面是日志内容。

[2019.08.05 13:55:57  9704] >>>>>>>>>>>>Begin to Run Logon.exe>>>>>>>>>>>>>
[2019.08.05 13:55:59  9704] logon.exe run path:[\\corp.ybm1某公司.com\SysVol\corp.ybm1某公司.com\Policies\{54A5A120-95F8-4C12-A318-61523EE543E3}\User\Scripts\Logon\logon.exe]
[2019.08.05 13:55:59  9704] ======Access to configuration information======
[2019.08.05 13:55:59  9704] ****Try to get configuration from parameter****
[2019.08.05 13:55:59  9704] Run from old version with param
[2019.08.05 13:56:某公司  9704] Delete the PC configure file sinforIP
[2019.08.05 13:56:某公司  9704] Delete "\\10.10.60.36\userdata$\wangze\Application Data\.logon\sinforIP" failed
[2019.08.05 13:56:某公司  9704] Verify config argument
[2019.08.05 13:56:01  9704] =============Domain user detection=============
[2019.08.05 13:56:01  9704] GetUserInfo successed!
[2019.08.05 13:56:01  9704] userdomain = "corp.ybm1某公司.com"
[2019.08.05 13:56:01  9704] *************Domain user to login**************
[2019.08.05 13:56:01  9704] =====Process only detection and protection=====
[2019.08.05 13:56:01  9704] No other same process is running
[2019.08.05 13:56:01  9704] ======Save the configuration and process=======
[2019.08.05 13:56:01  9704] Save to PC logi某公司pt.ini successed
[2019.08.05 13:56:01  9704] Save config to configure file "\\10.10.60.36\userdata$\wangze\Application Data\.logon\logi某公司pt.ini" successed
[2019.08.05 13:56:01  9704] enable copy program to startup
[2019.08.05 13:56:01  9704] Copy "\\corp.ybm1某公司.com\SysVol\corp.ybm1某公司.com\Policies\{54A5A120-95F8-4C12-A318-61523EE543E3}\User\Scripts\Logon\logon.exe" to "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe" successed
[2019.08.05 13:56:02  9704] ===============Single login AC ================
[2019.08.05 13:56:02  9704] ************Send login info. begin:************
[2019.08.05 13:56:02  9704] Login AC IP[1] - "10.10.XXX.30" <----- USER IP[1] - "10.10.XX.21"
[2019.08.05 13:56:02  9704] *********************IPV4*********************
[2019.08.05 13:56:02  9704] login [1] time.  bResponse=1
[2019.08.05 13:56:07  9704] =ERR: Timeout=
[2019.08.05 13:56:07  9704] login [2] time.  bResponse=1
[2019.08.05 13:56:12  9704] =ERR: Timeout=
[2019.08.05 13:56:12  9704] login [3] time.  bResponse=1
[2019.08.05 13:56:18  9704] =ERR: Timeout=
[2019.08.05 13:56:18  9704] SendLogonMsgToAC() out. 某公司rmal.
[2019.08.05 13:56:18  9704] =ERR: Login Failed! ACIP: 10.10.250.30, port: 1775, key: ac2019xyy, bResponse:1=
[2019.08.05 13:56:18  9704] ************Send login info. end.**************
[2019.08.05 13:56:18  9704] ========Permanent memory and detection=========
[2019.08.05 13:56:29  4156] >>>>>>>>>>>>Begin to Run Logon.exe>>>>>>>>>>>>>


[2019.08.05 13:56:29  4156] logon.exe run path:[\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe]
[2019.08.05 13:56:29  4156] ======Access to configuration information======
[2019.08.05 13:56:31  4156] *******Try to get configuration from exe*******
[2019.08.05 13:56:31  4156] get the module path "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe" success
[2019.08.05 13:56:31  4156] There is 某公司 param in exe
[2019.08.05 13:56:31  4156] **Try to get configuration from domain sinforIP**
[2019.08.05 13:56:31  4156] Get the domain configuration file path "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\sinforIP"
[2019.08.05 13:56:32  4156] **Try to get configuration from PC sinforIP**
[2019.08.05 13:56:34  4156] Get the local configuration file path "\\10.10.60.36\userdata$\wangze\Application Data\.logon\sinforIP"
[2019.08.05 13:56:34  4156] Can 某公司t load sinforIP
[2019.08.05 13:56:34  4156] **Try to get configuration from PC logi某公司pt.ini**
[2019.08.05 13:56:35  4156] Get the local old configuration file path "\\10.10.60.36\userdata$\wangze\Application Data\.logon\logi某公司pt.ini"
[2019.08.05 13:56:36  4156] =Run from PC logi某公司pt.ini without param=
[2019.08.05 13:56:36  4156] Verify config argument
[2019.08.05 13:56:36  4156] =============Domain user detection=============
[2019.08.05 13:56:36  4156] userdomain = "corp.ybm1某公司.com"
[2019.08.05 13:56:36  4156] *************Domain user to login**************
[2019.08.05 13:56:36  4156] =====Process only detection and protection=====
[2019.08.05 13:56:36  4156] Other same process is running.
[2019.08.05 13:56:36  4156] The module path: "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe"  The startup path: "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe"
[2019.08.05 13:56:36  4156] A某公司ther same process is running. self exit
[2019.08.05 13:56:36  4156] ************Send login info. begin:************
[2019.08.05 13:56:37  4156] Login AC IP[1] - "10.10.250.30" <----- USER IP[1] - "10.10.62.21"
[2019.08.05 13:56:37  4156] *********************IPV4*********************
[2019.08.05 13:56:37  4156] login [1] time.  bResponse=1
[2019.08.05 13:56:42  4156] =ERR: Timeout=
[2019.08.05 13:56:42  4156] login [2] time.  bResponse=1
[2019.08.05 13:56:47  4156] =ERR: Timeout=
[2019.08.05 13:56:47  4156] login [3] time.  bResponse=1
[2019.08.05 13:56:52  4156] =ERR: Timeout=
[2019.08.05 13:56:52  4156] SendLogonMsgToAC() out. 某公司rmal.
[2019.08.05 13:56:52  4156] =ERR: Login Failed! ACIP: 10.10.250.30, port: 1775, key: ac2019xyy, bResponse:1=
[2019.08.05 13:56:52  4156] ************Send login info. end.**************
[2019.08.05 13:56:52  4156] >>>>>>>>>>>>logon.exe is exiting(3)>>>>>>>>>>>>


[2019.08.05 13:59:17  5580] >>>>>>>>>>>>Begin to Run Logon.exe>>>>>>>>>>>>>


[2019.08.05 13:59:17  5580] logon.exe run path:[\\corp.ybm1某公司.com\SysVol\corp.ybm1某公司.com\Policies\{54A5A120-95F8-4C12-A318-61523EE543E3}\User\Scripts\Logon\logon.exe]
[2019.08.05 13:59:17  5580] ======Access to configuration information======
[2019.08.05 13:59:17  5580] ****Try to get configuration from parameter****
[2019.08.05 13:59:17  5580] Run from old version with param
[2019.08.05 13:59:17  5580] Delete the PC configure file sinforIP
[2019.08.05 13:59:20  5580] Delete "\\10.10.60.36\userdata$\wangze\Application Data\.logon\sinforIP" failed
[2019.08.05 13:59:20  5580] Verify config argument
[2019.08.05 13:59:20  5580] =============Domain user detection=============
[2019.08.05 13:59:21  5580] GetUserInfo successed!
[2019.08.05 13:59:21  5580] userdomain = "corp.ybm1某公司.com"
[2019.08.05 13:59:22  5580] *************Domain user to login**************
[2019.08.05 13:59:23  5580] =====Process only detection and protection=====
[2019.08.05 13:59:24  5580] No other same process is running
[2019.08.05 13:59:24  5580] ======Save the configuration and process=======
[2019.08.05 13:59:25  5580] Save to PC logi某公司pt.ini successed
[2019.08.05 13:59:25  5580] Save config to configure file "\\10.10.60.36\userdata$\wangze\Application Data\.logon\logi某公司pt.ini" successed
[2019.08.05 13:59:25  5580] enable copy program to startup
[2019.08.05 13:59:25  5580] Copy "\\corp.ybm1某公司.com\SysVol\corp.ybm1某公司.com\Policies\{54A5A120-95F8-4C12-A318-61523EE543E3}\User\Scripts\Logon\logon.exe" to "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe" successed
[2019.08.05 13:59:25  5580] ===============Single login AC ================
[2019.08.05 13:59:25  5580] ************Send login info. begin:************
[2019.08.05 13:59:25  5580] Login AC IP[1] - "10.10.250.30" <----- USER IP[1] - "10.10.62.50"
[2019.08.05 13:59:25  5580] *********************IPV4*********************
[2019.08.05 13:59:25  5580] login [1] time.  bResponse=1
[2019.08.05 13:59:30  5580] =ERR: Timeout=
[2019.08.05 13:59:30  5580] login [2] time.  bResponse=1
[2019.08.05 13:59:35  5580] =ERR: Timeout=
[2019.08.05 13:59:35  5580] login [3] time.  bResponse=1
[2019.08.05 13:59:40  5580] =ERR: Timeout=
[2019.08.05 13:59:42  5580] SendLogonMsgToAC() out. 某公司rmal.
[2019.08.05 13:59:42  5580] =ERR: Login Failed! ACIP: 10.10.XXX.30, port: 1775, key: ac2019xyy, bResponse:1=
[2019.08.05 13:59:42  5580] ************Send login info. end.**************
[2019.08.05 13:59:42  5580] ========Permanent memory and detection=========
[2019.08.05 13:59:48  4312] >>>>>>>>>>>>Begin to Run Logon.exe>>>>>>>>>>>>>


[2019.08.05 13:59:48  4312] logon.exe run path:[\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe]
[2019.08.05 13:59:49  4312] ======Access to configuration information======
[2019.08.05 13:59:50  4312] *******Try to get configuration from exe*******
[2019.08.05 13:59:50  4312] get the module path "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe" success
[2019.08.05 13:59:50  4312] There is 某公司 param in exe
[2019.08.05 13:59:53  4312] **Try to get configuration from domain sinforIP**
[2019.08.05 13:59:53  4312] Get the domain configuration file path "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\sinforIP"
[2019.08.05 13:59:53  4312] **Try to get configuration from PC sinforIP**
[2019.08.05 13:59:53  4312] Get the local configuration file path "\\10.10.60.36\userdata$\wangze\Application Data\.logon\sinforIP"
[2019.08.05 13:59:53  4312] Can 某公司t load sinforIP
[2019.08.05 13:59:54  4312] **Try to get configuration from PC logi某公司pt.ini**
[2019.08.05 13:59:54  4312] Get the local old configuration file path "\\10.10.60.36\userdata$\wangze\Application Data\.logon\logi某公司pt.ini"
[2019.08.05 13:59:54  4312] =Run from PC logi某公司pt.ini without param=
[2019.08.05 13:59:54  4312] Verify config argument
[2019.08.05 13:59:54  4312] =============Domain user detection=============
[2019.08.05 13:59:54  4312] GetUserInfo successed!
[2019.08.05 13:59:55  4312] userdomain = "corp.ybm1某公司.com"
[2019.08.05 13:59:55  4312] *************Domain user to login**************
[2019.08.05 13:59:55  4312] =====Process only detection and protection=====
[2019.08.05 13:59:55  4312] Other same process is running.
[2019.08.05 13:59:56  4312] The module path: "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe"  The startup path: "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe"
[2019.08.05 13:59:56  4312] A某公司ther same process is running. self exit
[2019.08.05 13:59:56  4312] ************Send login info. begin:************
[2019.08.05 13:59:56  4312] Login AC IP[1] - "10.10.250.30" <----- USER IP[1] - "10.10.62.50"
[2019.08.05 13:59:56  4312] *********************IPV4*********************
[2019.08.05 13:59:57  4312] login [1] time.  bResponse=1
[2019.08.05 14:某公司:02  4312] =ERR: Timeout=
[2019.08.05 14:某公司:02  4312] login [2] time.  bResponse=1
[2019.08.05 14:某公司:07  4312] =ERR: Timeout=
[2019.08.05 14:某公司:07  4312] login [3] time.  bResponse=1
[2019.08.05 14:某公司:12  4312] =ERR: Timeout=
[2019.08.05 14:某公司:12  4312] SendLogonMsgToAC() out. 某公司rmal.
[2019.08.05 14:某公司:12  4312] =ERR: Login Failed! ACIP: 10.10.250.30, port: 1775, key: ac2019xyy, bResponse:1=
[2019.08.05 14:某公司:12  4312] ************Send login info. end.**************
[2019.08.05 14:某公司:12  4312] >>>>>>>>>>>>logon.exe is exiting(3)>>>>>>>>>>>>

解决该疑问,预计可以帮助到 23101 人!

回帖即可获得
2S豆
,被楼主采纳即奖励20S豆+悬赏奖励10S豆+10分钟内回帖奖励10S豆 [已过期] ,了解更多S豆奖励信息

完善手机号和公司名称,让服务更省心更便捷!立即完善

哒哒哒 发表于 2019-8-6 10:14
  
您好,能将您的单点登录配置截图看下吗
社区智能客服_花花 发表于 2019-8-8 16:54
  
您好,  根据您发送的日志 最后看到是超时识别情况, 辛苦您核对下PC能不能正常登录到AD域, PC和AC是否是正常通信的, 设备地址 共享密钥端口等是否一致,谢谢

等我来答:

换一批

发表新帖
热门标签
全部标签>
新版本体验
安装部署配置
标准化排查
每日一问
GIF动图学习
【 社区to talk】
产品连连看
纪元平台
功能体验
2025年技术争霸赛
西北区每日一问
高手请过招
测试报告
用户认证
信服课堂视频
畅聊IT
功能咨询
秒懂零信任
平台使用
山东区技术晨报
北京区每日一练
社区新周刊
声音值千金
答题自测
专家问答
技术笔记
技术圆桌
在线直播
MVP
网络基础知识
升级
安全攻防
上网策略
日志审计
问题分析处理
流量管理
每日一记
运维工具
原创分享
解决方案
sangfor周刊
VPN 对接
项目案例
SANGFOR资讯
专家分享
技术顾问
信服故事
SDP百科
终端接入
授权
设备维护
资源访问
地址转换
虚拟机
存储
迁移
排障笔记本
产品预警公告
玩转零信任
S豆商城资讯
技术争霸赛
「智能机器人」
追光者计划
2023技术争霸赛专题
卧龙计划
华北区拉练
天逸直播
以战代练
技术晨报
技术盲盒
文档捉虫
齐鲁TV
华北区交付直播
每周精选
2024年技术争霸赛
场景专题
故障笔记
排障那些事
升级&主动服务
高频问题集锦
POC测试案例
全能先锋系列
安全效果
云化安全能力
专家说
热门活动
产品动态
行业实践
产品解析
关键解决方案
工具体验官

本版版主

127
325
362

发帖

粉丝

关注

5
10
7

发帖

粉丝

关注

本版达人

新手89785...

本周建议达人

七嘴八舌bar

本周分享达人

新手76619...

本周提问达人