正常配置单点登录后还是每次提示身份验证 10

请大神帮我看下是什么问题，我们北京有两台域控，BJ01 BJ02 在ldap协议都添加了服务器，认证策略 认证方式 密码认证里面也都加了，组策略可以看到正常应用，但还是提示错误，下面是日志内容。

[2019.08.05 13:55:57  9704] >>>>>>>>>>>>Begin to Run Logon.exe>>>>>>>>>>>>>

[2019.08.05 13:55:59  9704] logon.exe run path:[\\corp.ybm1某公司.com\SysVol\corp.ybm1某公司.com\Policies\{54A5A120-95F8-4C12-A318-61523EE543E3}\User\Scripts\Logon\logon.exe]

[2019.08.05 13:55:59  9704] ======Access to configuration information======

[2019.08.05 13:55:59  9704] ****Try to get configuration from parameter****

[2019.08.05 13:55:59  9704] Run from old version with param

[2019.08.05 13:56:某公司  9704] Delete the PC configure file sinforIP

[2019.08.05 13:56:某公司  9704] Delete "\\10.10.60.36\userdata$\wangze\Application Data\.logon\sinforIP" failed

[2019.08.05 13:56:某公司  9704] Verify config argument

[2019.08.05 13:56:01  9704] =============Domain user detection=============

[2019.08.05 13:56:01  9704] GetUserInfo successed!

[2019.08.05 13:56:01  9704] userdomain = "corp.ybm1某公司.com"

[2019.08.05 13:56:01  9704] *************Domain user to login**************

[2019.08.05 13:56:01  9704] =====Process only detection and protection=====

[2019.08.05 13:56:01  9704] No other same process is running

[2019.08.05 13:56:01  9704] ======Save the configuration and process=======

[2019.08.05 13:56:01  9704] Save to PC logi某公司pt.ini successed

[2019.08.05 13:56:01  9704] Save config to configure file "\\10.10.60.36\userdata$\wangze\Application Data\.logon\logi某公司pt.ini" successed

[2019.08.05 13:56:01  9704] enable copy program to startup

[2019.08.05 13:56:01  9704] Copy "\\corp.ybm1某公司.com\SysVol\corp.ybm1某公司.com\Policies\{54A5A120-95F8-4C12-A318-61523EE543E3}\User\Scripts\Logon\logon.exe" to "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe" successed

[2019.08.05 13:56:02  9704] ===============Single login AC ================

[2019.08.05 13:56:02  9704] ************Send login info. begin:************

[2019.08.05 13:56:02  9704] Login AC IP[1] - "10.10.XXX.30" <----- USER IP[1] - "10.10.XX.21"

[2019.08.05 13:56:02  9704] *********************IPV4*********************

[2019.08.05 13:56:02  9704] login [1] time.  bResponse=1

[2019.08.05 13:56:07  9704] =ERR: Timeout=

[2019.08.05 13:56:07  9704] login [2] time.  bResponse=1

[2019.08.05 13:56:12  9704] =ERR: Timeout=

[2019.08.05 13:56:12  9704] login [3] time.  bResponse=1

[2019.08.05 13:56:18  9704] =ERR: Timeout=

[2019.08.05 13:56:18  9704] SendLogonMsgToAC() out. 某公司rmal.

[2019.08.05 13:56:18  9704] =ERR: Login Failed! ACIP: 10.10.250.30, port: 1775, key: ac2019xyy, bResponse:1=

[2019.08.05 13:56:18  9704] ************Send login info. end.**************

[2019.08.05 13:56:18  9704] ========Permanent memory and detection=========

[2019.08.05 13:56:29  4156] >>>>>>>>>>>>Begin to Run Logon.exe>>>>>>>>>>>>>

[2019.08.05 13:56:29  4156] logon.exe run path:[\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe]

[2019.08.05 13:56:29  4156] ======Access to configuration information======

[2019.08.05 13:56:31  4156] *******Try to get configuration from exe*******

[2019.08.05 13:56:31  4156] get the module path "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe" success

[2019.08.05 13:56:31  4156] There is 某公司 param in exe

[2019.08.05 13:56:31  4156] **Try to get configuration from domain sinforIP**

[2019.08.05 13:56:31  4156] Get the domain configuration file path "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\sinforIP"

[2019.08.05 13:56:32  4156] **Try to get configuration from PC sinforIP**

[2019.08.05 13:56:34  4156] Get the local configuration file path "\\10.10.60.36\userdata$\wangze\Application Data\.logon\sinforIP"

[2019.08.05 13:56:34  4156] Can 某公司t load sinforIP

[2019.08.05 13:56:34  4156] **Try to get configuration from PC logi某公司pt.ini**

[2019.08.05 13:56:35  4156] Get the local old configuration file path "\\10.10.60.36\userdata$\wangze\Application Data\.logon\logi某公司pt.ini"

[2019.08.05 13:56:36  4156] =Run from PC logi某公司pt.ini without param=

[2019.08.05 13:56:36  4156] Verify config argument

[2019.08.05 13:56:36  4156] =============Domain user detection=============

[2019.08.05 13:56:36  4156] userdomain = "corp.ybm1某公司.com"

[2019.08.05 13:56:36  4156] *************Domain user to login**************

[2019.08.05 13:56:36  4156] =====Process only detection and protection=====

[2019.08.05 13:56:36  4156] Other same process is running.

[2019.08.05 13:56:36  4156] The module path: "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe"  The startup path: "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe"

[2019.08.05 13:56:36  4156] A某公司ther same process is running. self exit

[2019.08.05 13:56:36  4156] ************Send login info. begin:************

[2019.08.05 13:56:37  4156] Login AC IP[1] - "10.10.250.30" <----- USER IP[1] - "10.10.62.21"

[2019.08.05 13:56:37  4156] *********************IPV4*********************

[2019.08.05 13:56:37  4156] login [1] time.  bResponse=1

[2019.08.05 13:56:42  4156] =ERR: Timeout=

[2019.08.05 13:56:42  4156] login [2] time.  bResponse=1

[2019.08.05 13:56:47  4156] =ERR: Timeout=

[2019.08.05 13:56:47  4156] login [3] time.  bResponse=1

[2019.08.05 13:56:52  4156] =ERR: Timeout=

[2019.08.05 13:56:52  4156] SendLogonMsgToAC() out. 某公司rmal.

[2019.08.05 13:56:52  4156] =ERR: Login Failed! ACIP: 10.10.250.30, port: 1775, key: ac2019xyy, bResponse:1=

[2019.08.05 13:56:52  4156] ************Send login info. end.**************

[2019.08.05 13:56:52  4156] >>>>>>>>>>>>logon.exe is exiting(3)>>>>>>>>>>>>

[2019.08.05 13:59:17  5580] >>>>>>>>>>>>Begin to Run Logon.exe>>>>>>>>>>>>>

[2019.08.05 13:59:17  5580] logon.exe run path:[\\corp.ybm1某公司.com\SysVol\corp.ybm1某公司.com\Policies\{54A5A120-95F8-4C12-A318-61523EE543E3}\User\Scripts\Logon\logon.exe]

[2019.08.05 13:59:17  5580] ======Access to configuration information======

[2019.08.05 13:59:17  5580] ****Try to get configuration from parameter****

[2019.08.05 13:59:17  5580] Run from old version with param

[2019.08.05 13:59:17  5580] Delete the PC configure file sinforIP

[2019.08.05 13:59:20  5580] Delete "\\10.10.60.36\userdata$\wangze\Application Data\.logon\sinforIP" failed

[2019.08.05 13:59:20  5580] Verify config argument

[2019.08.05 13:59:20  5580] =============Domain user detection=============

[2019.08.05 13:59:21  5580] GetUserInfo successed!

[2019.08.05 13:59:21  5580] userdomain = "corp.ybm1某公司.com"

[2019.08.05 13:59:22  5580] *************Domain user to login**************

[2019.08.05 13:59:23  5580] =====Process only detection and protection=====

[2019.08.05 13:59:24  5580] No other same process is running

[2019.08.05 13:59:24  5580] ======Save the configuration and process=======

[2019.08.05 13:59:25  5580] Save to PC logi某公司pt.ini successed

[2019.08.05 13:59:25  5580] Save config to configure file "\\10.10.60.36\userdata$\wangze\Application Data\.logon\logi某公司pt.ini" successed

[2019.08.05 13:59:25  5580] enable copy program to startup

[2019.08.05 13:59:25  5580] Copy "\\corp.ybm1某公司.com\SysVol\corp.ybm1某公司.com\Policies\{54A5A120-95F8-4C12-A318-61523EE543E3}\User\Scripts\Logon\logon.exe" to "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe" successed

[2019.08.05 13:59:25  5580] ===============Single login AC ================

[2019.08.05 13:59:25  5580] ************Send login info. begin:************

[2019.08.05 13:59:25  5580] Login AC IP[1] - "10.10.250.30" <----- USER IP[1] - "10.10.62.50"

[2019.08.05 13:59:25  5580] *********************IPV4*********************

[2019.08.05 13:59:25  5580] login [1] time.  bResponse=1

[2019.08.05 13:59:30  5580] =ERR: Timeout=

[2019.08.05 13:59:30  5580] login [2] time.  bResponse=1

[2019.08.05 13:59:35  5580] =ERR: Timeout=

[2019.08.05 13:59:35  5580] login [3] time.  bResponse=1

[2019.08.05 13:59:40  5580] =ERR: Timeout=

[2019.08.05 13:59:42  5580] SendLogonMsgToAC() out. 某公司rmal.

[2019.08.05 13:59:42  5580] =ERR: Login Failed! ACIP: 10.10.XXX.30, port: 1775, key: ac2019xyy, bResponse:1=

[2019.08.05 13:59:42  5580] ************Send login info. end.**************

[2019.08.05 13:59:42  5580] ========Permanent memory and detection=========

[2019.08.05 13:59:48  4312] >>>>>>>>>>>>Begin to Run Logon.exe>>>>>>>>>>>>>

[2019.08.05 13:59:48  4312] logon.exe run path:[\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe]

[2019.08.05 13:59:49  4312] ======Access to configuration information======

[2019.08.05 13:59:50  4312] *******Try to get configuration from exe*******

[2019.08.05 13:59:50  4312] get the module path "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe" success

[2019.08.05 13:59:50  4312] There is 某公司 param in exe

[2019.08.05 13:59:53  4312] **Try to get configuration from domain sinforIP**

[2019.08.05 13:59:53  4312] Get the domain configuration file path "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\sinforIP"

[2019.08.05 13:59:53  4312] **Try to get configuration from PC sinforIP**

[2019.08.05 13:59:53  4312] Get the local configuration file path "\\10.10.60.36\userdata$\wangze\Application Data\.logon\sinforIP"

[2019.08.05 13:59:53  4312] Can 某公司t load sinforIP

[2019.08.05 13:59:54  4312] **Try to get configuration from PC logi某公司pt.ini**

[2019.08.05 13:59:54  4312] Get the local old configuration file path "\\10.10.60.36\userdata$\wangze\Application Data\.logon\logi某公司pt.ini"

[2019.08.05 13:59:54  4312] =Run from PC logi某公司pt.ini without param=

[2019.08.05 13:59:54  4312] Verify config argument

[2019.08.05 13:59:54  4312] =============Domain user detection=============

[2019.08.05 13:59:54  4312] GetUserInfo successed!

[2019.08.05 13:59:55  4312] userdomain = "corp.ybm1某公司.com"

[2019.08.05 13:59:55  4312] *************Domain user to login**************

[2019.08.05 13:59:55  4312] =====Process only detection and protection=====

[2019.08.05 13:59:55  4312] Other same process is running.

[2019.08.05 13:59:56  4312] The module path: "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe"  The startup path: "\\10.10.60.36\userdata$\wangze\Start Menu\Programs\Startup\logon.exe"

[2019.08.05 13:59:56  4312] A某公司ther same process is running. self exit

[2019.08.05 13:59:56  4312] ************Send login info. begin:************

[2019.08.05 13:59:56  4312] Login AC IP[1] - "10.10.250.30" <----- USER IP[1] - "10.10.62.50"

[2019.08.05 13:59:56  4312] *********************IPV4*********************

[2019.08.05 13:59:57  4312] login [1] time.  bResponse=1

[2019.08.05 14:某公司:02  4312] =ERR: Timeout=

[2019.08.05 14:某公司:02  4312] login [2] time.  bResponse=1

[2019.08.05 14:某公司:07  4312] =ERR: Timeout=

[2019.08.05 14:某公司:07  4312] login [3] time.  bResponse=1

[2019.08.05 14:某公司:12  4312] =ERR: Timeout=

[2019.08.05 14:某公司:12  4312] SendLogonMsgToAC() out. 某公司rmal.

[2019.08.05 14:某公司:12  4312] =ERR: Login Failed! ACIP: 10.10.250.30, port: 1775, key: ac2019xyy, bResponse:1=

[2019.08.05 14:某公司:12  4312] ************Send login info. end.**************

[2019.08.05 14:某公司:12  4312] >>>>>>>>>>>>logon.exe is exiting(3)>>>>>>>>>>>>

您好，能将您的单点登录配置截图看下吗

您好，  根据您发送的日志 最后看到是超时识别情况， 辛苦您核对下PC能不能正常登录到AD域， PC和AC是否是正常通信的， 设备地址 共享密钥端口等是否一致，谢谢